Energy storage systems, usually batteries, are essential for all-electric vehicles, plug-in hybrids, and hybrids, the U.S. Department of Energy's Alternative Fuels Data Center says in its official explainer on batteries for electric vehicles. Most of today's all-electric vehicles and plug-in hybrids use lithium-ion batteries, though the exact chemistry often varies from the batteries in phones and laptops.
AFDC says lithium-ion packs have high energy per unit mass and volume, a high power-to-weight ratio, high energy efficiency, good high-temperature performance, long life, and low self-discharge. Most components can be recycled, but the cost of material recovery remains a challenge. Research is ongoing to reduce cost, extend useful life, use less cobalt, and address safety concerns in various fault conditions. Nickel-metal hydride batteries have been widely used in hybrids; they last longer than lead-acid batteries and are abuse-tolerant, but they are costly, have a high self-discharge rate, generate heat at high temperatures, and require control of hydrogen loss. Lead-acid batteries are inexpensive and recyclable, but low specific energy, poor cold-temperature performance, and short life limit their use. In commercially available electric vehicles they are used only for ancillary loads, and they are also used for stop-start function in gasoline cars. Ultracapacitors store energy at an electrode-electrolyte interface, have low energy density but very high power density, and can help with acceleration, hill climbing, brake-energy recovery, or load leveling.
On recycling, AFDC says electric vehicles are still relatively new in the U.S. market, so only a small number have reached the end of their useful lives. Studies have shown that an EV battery could have at least 70 percent of its initial capacity left at the end of its life if it has not failed or been damaged, enough for many energy-storage uses, and that the battery can continue to work for another 10 years or more. Second-use applications such as stationary grid and backup power are technically feasible, the page says, though economic viability is still evolving. Costs can include transportation, storage, sorting and testing, remanufacturing, reassembly, integration, certification, and installation.
Widespread recycling, AFDC says, would help keep hazardous materials out of the waste stream and return critical materials to the supply chain. DOE is supporting the Lithium-Ion Battery Recycling Prize to develop solutions for collecting, sorting, storing, and transporting spent batteries. There are three major recovery technologies in different stages of commercialization: smelting, or pyrometallurgy, a high-temperature furnace process that can accept multiple battery types but burns significant energy, with lithium often left in slag used as a concrete additive; chemical leaching, or hydrometallurgy, which uses chemical treatment of "black mass" to extract compounds including lithium, with lower capital cost and several factories being built; and direct recycling, which recovers cathodes while maintaining their molecular structure rather than breaking them down into metals.
Mechanical treatment through disassembly, crushing, shredding, and separation to create black mass is a major element of any of those routes. Separating different materials remains a stumbling block, the page says, so battery design that considers disassembly, and more standardized cells, would make recycling easier. This is an official DOE explainer, not a Tesla product announcement, and it does not give a price to recycle a pack or a list of Bay Area drop-off sites.
